Courses

 

    RSES UNIT STUDY COURSES

    For more information contact RSES by phone at 503-242-1929 or by e-mail.

    Click here to download a registration form.

    Units
    The term "units" is a broad and refers to all of the courses in the 16 or less week format. Sessions begin in September and end in December.

    Course tuition includes a thick 3-ring training binder and handouts. We recommend keeping this binder in the service van as a reference on the job.

    A minimum of five students is required for these
    classes to go.

    Courses are broken down into categories and each category is broken down into units.

    Each Unit is 16 or less, weeks long.

    Each category has 4 or more units to completion.

    certificate is earned at the successful completion of each unit and a diploma is earned upon successful completion of all the units in a category.

    Refrigeration & Air Conditioning
    Electricity
    Heating
    Controls

    Heat Pump



    Refrigeration & Air Conditioning (R/AC)

    R/AC UNIT 1 "PRINCIPLES OF REFRIGERATION"

    32 HOURS; 3.2 CEUs

    LESSON CONTENTS
    Lesson 1
    Introduction to Refrigeration & Air Conditioning

    Lesson 2
    Basic Physics

    Lesson 3
    Major Component Functions

    Lesson 4
    Gas Laws (Part 1)

    Lesson 5
    Gas Laws (Part 2)

    Lesson 6
    Pressure/Temperature Relationship (Part 1)

    Lesson 7
    Pressure/Temperature Relationship (Part 2)

    Lesson 8
    The Compression Refrigeration Cycle (Part 1)

    Lesson 9
    The Compression Refrigeration Cycle (Part 2)

    Lesson 10
    The Compression Refrigeration Cycle (Part 3)

    Lesson 11
    Using Pressure and Enthalpy Diagrams (Part 1)

    Lesson 12
    Using Pressure and Enthalpy Diagrams (Part 2)

    Lesson 13
    Safe Practices and Public Relations

    Lesson 14
    Glossary of Terms



    R/AC UNIT 2
    "COMPRESSORS, CONDENSERS, AND COOLING TOWERS"

    36 HOURS; 3.6 CEUs

    LESSON CONTENTS

    Lesson 1
    Compressors

    Lesson 2
    Open-Type Compressors

    Lesson 3
    Hermetic and Semi-Hermetic Compressors

    Lesson 4
    Refrigeration System Accessories

    Lesson 5
    Desiccants and Dryers

    Lesson 6
    Air Cooled Condensers

    Lesson 7
    Water Cooled Condensers

    Lesson 8
    Evaporative Condensers and Cooling Towers

    Lesson 9
    Water Treatment (Part 1)

    Lesson 10
    Water Treatment (Part 2)

    Lesson 11
    Closed Circuit Water Coolers

    Lesson 12
    Air Cooled Condensing Unit Room Requirements

    Lesson 13
    Heat Transfer Coils

    Lesson 14
    Multiple Rack Systems


    R/AC UNIT 3
    "EVAPORATORS AND SYSTEM COMPONENTS"

    38 HOURS; 3.8 CEUs

    LESSON CONTENTS

    Lesson 1
    Refrigeration Evaporators

    Lesson 2
    Defrosting Methods

    Lesson 3
    Capillary Tubes

    Lesson 4
    Thermostatic Expansion Valves (Part 1)

    Lesson 5
    Thermostatic Expansion Valves (Part 2)

    Lesson 6
    Refrigeration System Controls

    Lesson 7
    Refrigerant Tables

    Lesson 8
    Refrigerant Properties and Characteristics

    Lesson 9
    Refrigerant Designations

    Lesson 10
    Oil in Refrigeration Systems

    Lesson 11
    Recover, Recycle Reclaim

    Lesson 12
    Safe Handling of Refrigerants and Cylinders

    Lesson 13
    Refrigerant System Piping (Part 1)

    Lesson 14
    Refrigerant System Piping (Part 2)

    Lesson 15
    Retrofits and Disposal Requirements


    R/AC UNIT 4
    "TOOLS, CONTROLS, AND TROUBLESHOOTING"

    38 HOURS 3.8 CEUs

    LESSON CONTENTS

    Lesson 1
    Trade Tools

    Lesson 2
    Electricity for the Refrigeration Service Engineer (Part 1)

    Lesson 3
    Electricity for the Refrigeration Service Engineer (Part 2)

    Lesson 4
    Electric Motors in Refrigeration

    Lesson 5
    Motor Capacitors and Protectors (Part 1)

    Lesson 6
    Motor Capacitors and Protectors (Part 2)

    Lesson 7
    Low-Voltage Thermostats

    Lesson 8
    Introduction to Controls (Part 1)

    Lesson 9
    Introduction to Controls (Part 2)

    Lesson 10
    Basic Electronic Controls Applications

    Lesson 11
    Troubleshooting (Part 1)

    Lesson 12
    Troubleshooting (Part 2)

    Lesson 13
    Troubleshooting (Part 3)

    Lesson 14
    Troubleshooting (Part 4)

    Lesson 15
    Troubleshooting (Part 5)

    Lesson 16
    Compressor Replacement and System Evacuation


    Back to top


    Electricity

    ELECTRICITY UNIT 1
    "INTRODUCTION TO ELECTRICITY"

    40 HOURS; 4.0 CEUs


    LESSON CONTENTS
    Lesson 1
    Fundamental Concepts of Electricity

    Lesson 2
    Fundamental Concepts of Magnetism

    Lesson 3
    Voltage = EMF = Potential Difference

    Lesson 5
    Fundamental Concepts of Alternating Current

    Lesson 6
    Series and Parallel Circuits

    Lesson 7
    Electrical Symbols and Schematic Diagrams

    Lesson 8
    Electrical Safety



    ELECTRICITY UNIT 2
    "ELECTRICAL COMPONENTS"

    32 HOURS; 3.2 CEUs

    LESSON CONTENTS

    Lesson 1
    Resistors and Resistance

    Lesson 2
    Capacitors and Capacitance

    Lesson 3
    Inductors and Inductance

    Lesson 4
    Transformers

    Lesson 5
    Relays and Contactors

    Lesson 6
    Motors

    Lesson 7
    Circuit Protection Devices

    Lesson 8
    Conductors

    Lesson 9
    Power Supplies

    Lesson 10
    Basic Controls

    Lesson 11
    Miscellaneous Components



    ELECTRICITY UNIT 3
    "BASIC ELECTRONICS"

    36 Hours; 3.6 CEUs

    LESSON CONTENTS

    Lesson 1
    Back to Basics

    Lesson 2
    Solid State Fundamentals

    Lesson 3
    Diodes and Power Supplies

    Lesson 4
    Power Supply Regulation and Filtration

    Lesson 5
    Transistors

    Lesson 6
    Silicon-Controlled Rectifiers

    Lesson 7
    Triac and Diac Thyristors

    Lesson 8
    Pelletier Diodes

    Lesson 9
    Protective Devices

    Lesson 10
    Basic Binary

    Lesson 11
    Basic Digital Electronics

    Lesson 12
    Linear Integrated Circuits

    Lesson 13
    Digital Integrated Circuits

    Lesson 14
    Microprocessors and Computers


    Back to top


    Heating

    HEATING UNIT 1
    "HEATING FUNDAMENTALS"

    36 HOURS; 3.6 CEUs

    LESSON CONTENTS

    Lesson 1
    Introduction to the Concept of Heat

    Lesson 2
    Principles of Heating

    Lesson 3
    Principles of Heat Flow

    Lesson 4
    Heat Loss from Structures

    Lesson 5
    Review of Fundamentals of Heat Load Calculation

    Lesson 6
    Ducted Warm Air Systems/Room Air Distribution

    Lesson 7
    Duct Sizing and Layout

    Lesson 8
    Air Filtration

    Lesson 9
    Humidification (Part 1)

    Lesson 10
    Humidification (Part 2)

    Lesson 11
    Control Systems: A Functional Approach

    Lesson 12
    Review of Safety and Codes

    Lesson 13
    Customer Relations

    Lesson 14
    Glossary of Terms


    HEATING UNIT 2
    "ELECTRIC HEATING"

    36 HOURS; 3.6 CEUs

    LESSON CONTENTS

    Lesson 1
    Heating with Electricity

    Lesson 2
    Resistance Heating

    Lesson 3
    Heat Pumps

    Lesson 4
    Radiant Heating Systems

    Lesson 5
    Duct Heaters and Furnaces

    Lesson 6
    Baseboard and Unit Heaters

    Lesson 7
    Radiant Heat Installation and Service

    Lesson 8
    System Control Devices

    Lesson 9
    Electric Furnaces

    Lesson 10
    Duct Heaters

    Lesson 11
    Multi-Step Controllers (Part 1)

    Lesson 12
    Multi-Step Controllers (Part 2)

    Lesson 13
    Electronic Sequencing Control

    Lesson 14
    Decentralized Electric Heating Systems

    Lesson 15
    Electric Boilers


    HEATING UNIT 3 "GAS HEAT"
    32 HOURS; 3.2 CEUs

    LESSON CONTENTS

    Lesson 1
    Combustion Chemistry

    Lesson 2
    Heating Fuels-Gas

    Lesson 3
    Burners & Accessories

    Lesson 4
    Fuels Gases-Burner Types & Components

    Lesson 5
    Equipment-Location & Piping

    Lesson 6
    LP Gas Installation Procedures

    Lesson 7
    Electrical Controls Startup & Combustion

    Lesson 8
    Control Type Purpose & Function

    Lesson 9
    Combination Gas Controls

    Lesson 10
    Ignition Systems for Infra-red Heaters

    Lesson 11
    Gas Heating Equipment Maintenance

    Lesson 12
    Condensing Furnaces



    HEATING UNIT 4
    "HOT WATER HEATING"

    38 HOURS; 3.8 CEUs

    LESSON CONTENTS

    Lesson 1
    Introduction to Hot Water Heating

    Lesson 2
    Hot Water Boilers and Controls

    Lesson 3
    Heat Transfer Units

    Lesson 4
    Centrifugal Pumps

    Lesson 5
    Air Control

    Lesson 6
    Hot Water Specialties

    Lesson 7
    Piping Methods

    Lesson 8
    Pressure Drop Calculations

    Lesson 9
    Zoning

    Lesson 10
    Primary/Secondary Pumping

    Lesson 11
    Radiant Heating Systems

    Lesson 12
    Temperature Controls

    Lesson 13
    Troubleshooting System Components (Part 1)

    Lesson 14
    Troubleshooting System Components (Part 2)

    Lesson 15
    Troubleshooting System Components (Part 3)

    Lesson 16
    Analysis of System Problems


    Back to top


    Controls

    CONTROLS UNIT 1
    "FUNDAMENTAL CONTROLS"

    30 HOURS; 3.0 CEUs

    LESSON CONTENTS

    Lesson 1
    Types of Mechanical Equipment

    Lesson 2
    Controls Components and Variables

    Lesson 3
    Control Terminology

    Lesson 4
    Types of Control Systems

    Lesson 5
    Sequences of Operation

    Lesson 6
    Specifications

    Lesson 7
    Electrical Safety

    Lesson 8
    Sensors

    Lesson 9
    Valves and Dampers

    Lesson 10
    Glossary of Terms



    CONTROLS UNIT 2
    "PNEUMATIC CONTROLS"
    40 HOURS; 4.0 CEUs

    LESSON CONTENTS
    Lesson 1
    Basic Control Theory

    Lesson 2
    Air Supply Equipment (Part 1)

    Lesson 3
    Air Supply Equipment (Part 2)

    Lesson 4
    Thermostats and Controllers (Part 1)

    Lesson 5
    Thermostats and Controllers (Part 2)

    Lesson 6
    Transmitter-Receiver Controller Equipment

    Lesson 7
    Pneumatic Relays

    Lesson 8
    Valve and Damper Actuators

    Lesson 9
    Typical Component Applications

    Lesson 10
    Typical Control Applications

    Lesson 11
    System Applications (Part 1)

    Lesson 12
    System Applications (Part 2)

    Lesson 13
    System Applications (Part 3)

    Lesson 14
    Control System Maintenance

    Lesson 15
    Glossary of Terms

    Lesson 16
    Appendices


    CONTROLS UNIT 3
    "ELECTROMECHANICAL CONTROLS"

    38 HOURS; 3.8 CEUs

    LESSON CONTENTS

    Lesson 1
    Electrical Safety

    Lesson 2
    Ohms Law

    Lesson 3
    Components Part 1-Relays and Contactors

    Lesson 4
    Components Part 2-Capacitors

    Lesson 5
    Components Part 3-Capacitors

    Lesson 6
    Test Instruments

    Lesson 7
    Wiring Diagrams

    Lesson 8
    Circuit Protection

    Lesson 9
    Power Supplies

    Lesson 10
    Electrical Troubleshooting

    Lesson 11
    Controls Basics

    Lesson 12
    Modulating Controls (Part 1)

    Lesson 13
    Modulating Controls (Part 2)

    Lesson 14
    Applications (Part 1)

    Lesson 15
    Applications (Part 2)

    Lesson 16
    Appendix


    CONTROLS UNIT 4
    "BASIC ELECTRONICS"

    36 HOURS; 3.6 CEUs

    LESSON CONTENTS

    Lesson 1
    Back to Basics

    Lesson 2
    Solid State Fundamentals

    Lesson 3
    Diodes and Power Supplies

    Lesson 4
    Power Supply Regulation and Filtration

    Lesson 5
    Transistors

    Lesson 6
    Silicon-Controlled Rectifiers

    Lesson 7
    Triac and Diac Thyristors

    Lesson 8
    Pelletier Diodes

    Lesson 9
    Protective Devices

    Lesson 10
    Basic Binary

    Lesson 11
    Basic Digital Electronics

    Lesson 12
    Linear Integrated Circuits

    Lesson 13
    Digital Integrated Circuits

    Lesson 14
    Microprocessors and Computer


    Back to top


    Heat Pump

    128 hours, 12.8 CEUs


    Lesson 1 - Heat Pump Fundamentals

    Lesson 2 - Heat Pump Systems

    Lesson 3 - Heat Pump Principles

    Lesson 4 - Heat Pump Compressors

    Lesson 5 - Flow Controls and Accessories

    Lesson 6 - Heat Pump Electrical Systems

    Lesson 7 - Heat Pump Electrical Components

    Lesson 8 - Heat Pump Thermostats

    Lesson 9 - Air-to-Air Heat Pump Defrost

    Lesson 10 - Supplemental Electric Heat.

    Lesson 11 - Fossil Fuel Backup Heat

    Lesson 12 - Water-Source Heat Pump Systems

    Lesson 13 - Installing and Servicing Water-Source Heat Pumps

    Lesson 14 - Heat Pump Performance Criteria.

    Lesson 15 - Heat Pump Performance Checks.

    Lesson 16 - Heat Pump Installation Procedures.

    Lesson 17 - Heat Pump Piping

    Lesson 19 - Troubleshooting Exercises

    Lesson 20 - Refrigerant-Side Troubleshooting (Cooling Air-to-Air) Part 1

    Lesson 21 - Refrigerant-Side Troubleshooting (Cooling Air-to-Air) Part 2

    Lesson 22 - Refrigerant-Side Troubleshooting (Heating Air-to-Air) Part 1
    .
    Lesson 23 - Refrigerant-Side Troubleshooting (Heating Air-to-Air) Part 2

    Lesson 24 - Troubleshooting Refrigerant Circuit Components

    Lesson 25 - Troubleshooting Water-Source Heat Pumps.

    Lesson 26 - High-Efficiency Air-to-Air Heat Pumps

    Lesson 27 - Water-Source Heat Pumps for Special Applications

    Lesson 28 - Heat Load Calculations.

    Lesson 29 - Indoor Air Distribution

    Lesson 30 - Duct Design

    Lesson 31 - Diagnosing Air Flow Problems

    Lesson 32 - Customer Relations

    Back to top


 



How to Register

Download a
registration form.

For more information
contact RSES by phone at
503-242-1929 or by e-mail.




























RSES Multnomah Chapter

PO Box 6799
Portland, Oregon 97228

(503) 242-1929

© 2003 RSES Multnomah Chapter
 
Web design and maintenance by Amy K. Hanson Web & Print Design